Service Manual

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Usage
Information
You must configure VXLAN globally before using VXLAN-instance.
Related
Commands
feature vxlan — Enable VXLAN configuration globally on the platform.
vxlan-instance (VAP)
To configure a VXLAN-Access Port (VAP) in to VXLAN-instance
Syntax
vxlan-instance instance ID
To unconfigure VAP, use the no vxlan-instance 1 command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
Defaults Disabled
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S6000.
Usage
Information
You must disable vxlan-instance before unconfiguring VAP.
Related
Commands
feature vxlan — Enable VXLAN configuration globally on the platform.
max_backoff
Configures time to wait between connection attempts with controller.
Syntax
max_backoff time
Parameters
time Enter the time in milliseconds. The range is from 1000-180000. The default value is
30000.
Defaults 30000
Command Modes VXLAN INSTANCE
Virtual Extensible LAN (VXLAN) 1517