Service Manual

debug vxlan
Debug messages between the Gateway and Controller.
Syntax
debug vxlan
Defaults Disabled
Command Modes EXEC Privilege
Command
History
Version Description
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S6000.
fail-mode
Configures failure-mode on the platform.
Syntax
fail-mode secure
To disable the fail-mode secure, use the no fail-mode securecommand.
Parameters
secure Enter the keyword secure to delete all its database and hardware flows/
resources, when the VTEP loses connectivity with the controller.
Defaults non secure
Command Modes VXLAN INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related
Commands
vxlan-instance— Enable VXLAN Instance configuration on the platform.
vxlan-instance
Enable VXLAN Instance configuration on the platform.
Syntax
vxlan-instance instance ID
To enable the vxlan-instance command, use the [no] shut command.
To delete vxlan-instance from the system, use no vxlan-instance 1 command.
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
Defaults Disabled
Command Modes CONFIGURATION
1516 Virtual Extensible LAN (VXLAN)