Service Manual

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Example
show ip vrf
VRF-Name VRF-ID Interfaces
fault 0 Te 1/1-13,18-47,
Fo 1/49,50,51,52,
Ma 1/1,
Ma 2/1,
Ma 3/1,
Ma 4/1,
Ma 5/1,
Ma 6/1,
Nu 0,
Vl 1
test1 1 Te 1/14,16-17
test2 2 Te 1/15
management 64
Dell#show ip vrf test1
VRF-Name VRF-ID Interfaces
test1 1 Te 1/14,16-17
show run vrf
Displays configuration information corresponding to all the VRFs in the system.
Syntax
show run vrf vrf-name
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON and Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Usage
Information
This command displays information from the running-config corresponding to either a specific VRF or all
the VRFs in the system.
Virtual Routing and Forwarding (VRF) 1487