Service Manual

Parameters
imported-bgp Enter the keywords imported-bgp to redistribute leaked routes that are learned
using the BGP protocol.
imported-ospf Enter the keywords imported-ospf to redistribute leaked routes that are
learned using the OSPF protocol.
imported-isis Enter the keywords imported-isis to redistribute leaked routes that are
learned using the ISIS protocol.
route-map Enter the name of the route-map to specify the filtering criteria for imported
routes.
Command Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide. The following is a list of the Dell Networking OS version
history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Related
Commands
ip route-import — imports routes from another VRF.
interface management
Associates a management port with a management VRF.
Syntax
interface management
To delete the association between a management port and a management VRF, use the no interface
management command.
Command Modes VRF MODE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.4.(0.0) Introduced on the S-Series and Z9000.
Usage
Information
When you use this command, the management ports corresponding to both the active unit and the
standby unit are associated with the management VRF.
Virtual Routing and Forwarding (VRF) 1485