Service Manual

Virtual Routing and Forwarding (VRF)
Virtual Routing and Forwarding (VRF) allows multiple instances of a routing table to co-exist on the same router at the same
time.
Topics:
• ip vrf
• ip http vrf
• description
• ip vrf forwarding
• ip route-export
• ip route-import
• ipv6 route-export
• ipv6 route-import
• match source-protocol
• redistribute
• interface management
• maximum dynamic-routes
• show ip vrf
• show run vrf
ip vrf
Create or delete a customer VRF.
Syntax
ip vrf {vrf-name | management} [vrf_id]
To delete a customer VRF, use the no ip vrf {vrf-name | management} [vrf_id] command.
Parameters
vrf-name Enter the name of the VRF that you create.
management Enter the keyword management to create the management VRF.
vrf_id (Optional) Enter the ID of the VRF that you create.
Defaults Available by default for management VRF. For creating other customer VRFs, enable the feature vrf
option in Configuration mode.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON and Z9500.
9.4(0.0) Introduced on the S4810 and S4820T.
Usage
Information
You cannot use the keyword default as a VRF name as this name indicates a special VRF.
To create a management VRF, use the keyword management.
64
1478 Virtual Routing and Forwarding (VRF)