Service Manual

enable
Enable communication with the SupportAssist server.
Syntax
enable
To disable communication to a specific SupportAssist server, use the no enable command.
Command Modes SUPPORTASSIST SERVER
Command
History
Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Related
Commands
server on page 1425 — configures the name of the remote SupportAssist server.
url
Configure the URL to reach the SupportAssist remote server.
Syntax
url uniform-resource-locator
To delete the URL for the server, use the no url command.
Parameters
uniform-
resource-locator
Enter a text string for the URL using one of the following formats:
● http://[username:password@]<hostip>:<portNum>/<filepath>
● https://[username:password@]<hostip>:<portNum>/<filepath>
NOTE: The host IP for the server may be specified as an IPv4 address, an
IPv6 address or as a DNS hostname. If using the DNS hostname, the DNS
resolver will need to be configured and enabled.
Command Modes SUPPORTASSIST SERVER
Command
History
Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
The URL should be formatted to follow the ISO format.
show eula-consent
Display the EULA for the feature.
Syntax
show eula-consent {support-assist | other feature}
Parameters
support-assist |
other feature
Enter the keywords support-assist or the text corresponding to other feature.
Command Modes EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
1432 SupportAssist