Service Manual

enable
Enable all activities and severs for the SupportAssist service.
Syntax
enable all
To return to the default setting, use the no enable all command.
Parameters
all Enter the keyword all to enable all SupportAssist service activities.
Defaults Disabled
Command Modes SUPPORTASSIST
Command
History
Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
server
Configure the name of the remote SupportAssist Server and move to SupportAssist Server mode.
Syntax
server server-name
To delete a server, use the no server server-name command.
Parameters
server-name Enter the name of the remote SupportAssist Server. To include a space, enter a
space within double quotes.
Defaults Default server has URL stor.g3.ph.dell.com
Command Modes SUPPORTASSIST
Command
History
Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
The server-name is used as a reference only and is not required to be used as part of a URL definition.
There is a reserved name of default for the default server at stor.g3.ph.dell.com. You can customize
the defaults for this server by entering the server default command and use the custom commands.
You can configure one additional server.
SupportAssist Activity Commands
Dell Networking OS supports the following SupportAssist Activity mode commands.
action-manifest get
Copy an action-manifest file for an activity to the system.
Syntax
action-manifest get tftp | ftp | flash <file-specification> <local-file-
name>
Parameters
file-specification
Enter the full file specification for the action-manifest file. For example:
● tftp://hostip/filepath
SupportAssist 1425