Service Manual

contact-company
Configure the contact information for the company.
Syntax
contact-company name {company-name}[company-next-name] ... [company-next-
name]
To remove the contact company information, use the no contact-company command.
Parameters
company-name Enter the name for the company. If there are multiple words in the name, use
optional additional fields.
company-next-
name
(OPTIONAL) Enter the next components of the company name, up to 5
components are allowed.
Command Modes SUPPORTASSIST
Command
History
Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
You can configure only one contact-company.
It is not possible to remove the components of the company name. The no form of the command removes
the entire contact-company entry.
This command is optional for SupportAssist service configuration.
contact-person
Configure the contact name for an individual.
Syntax
contact-person [first <first-name>] last <last-name>
To remove the contact person and all their details, use the no contact-person [first <first-
name>] last <last-name> command.
Parameters
first-name (Optional) Enter the first name for the contact person. This is optional provided
each contact person name is unique. To include a space, enter a space within
double quotes.
last-name Enter the last name for the contact person. To include a space, enter a space
within double quotes.
Command Modes SUPPORTASSIST
Command
History
Version Description
9.9(0.0) Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000,
S6000–ON, Z9500, MXL.
Usage
Information
Each contact person must be unique by their name.
You can configure only one contact person.
It is not possible to remove the first name or last name. The no form of the command removes the entire
contact-person entry.
This command is optional for SupportAssist service configuration.
1424 SupportAssist