Service Manual

Version Description
9.5(0.1) Introduced on the Z9500.
9.5(0.0) Introduced on the MXL.
Example
Dell(conf)#clear logging auditlog
Related
Commands
show logging auditlog — displays audit log
default logging buffered
Return to the default setting for messages logged to the internal buffer.
Syntax
default logging buffered
Defaults size = 40960; level = 7 or debugging
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command
Related
Commands
logging buffered — sets the logging buffered parameters.
default logging console
Return the default settings for messages logged to the console.
Syntax
default logging console
Defaults level = 7 or debugging
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Simple Network Management Protocol (SNMP) and Syslog 1367