Service Manual

265 bcmLINK.0 117927936 0 0 0 0 0
!----------- output truncated --------------!
show software ifm
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface |
stack-unit unit-ID | trace-flags}
Parameters
clients Enter the keyword clients to display IFM client information.
summary (OPTIONAL) Enter the keyword summary to display brief information about IFM
clients.
ifagt number Enter the keyword ifagt then the number of an interface agent to display
software pipe and IPC statistics.
ifcb interface Enter the keyword ifcb then one of the following interface IDs then the slot/
port[/subport] information to display interface control block information for that
interface:
● For a port channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport] information.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the
slot/port information.
stack-unit unit-
ID
Enter the keyword stack-unit then the stack member number to display IFM
information for that unit.
NOTE: This option is only available on the S-Series.
trace-flags Enter the keyword trace-flags to display IFM information for internal trace
flags.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
7.6.1.0 Introduced for the C-Series and S-Series.
136 Control and Monitoring