Service Manual

Related
Commands
show hardware layer2 acl — displays Layer 2 ACL data for the selected stack member and stack member
port-pipe.
show hardware layer3 — displays Layer 3 ACL or QoS data for the selected stack member and stack
member port-pipe.
show hardware stack-unit — displays the data plane or management plane input and output statistics of
the designated component of the designated stack member.
show hardware system-flow — displays Layer 3 ACL or QoS data for the selected stack member and
stack member port-pipe.
show interfaces stack-unit — displays information on all interfaces on a specific S-Series stack member.
show processes memory (S-Series) — displays CPU usage information based on processes running in an
S-Series.
show processes ipc flow-control
Display the single window protocol queue (SWPQ) statistics.
Syntax
show processes ipc flow-control [cp]
Parameters
cp (OPTIONAL) Enter the keyword cp to view the control processor’s SWPQ
statistics.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series and E-Series.
Usage
Information
Field Description
Source QID /Tx
Process
Source Service Identifier
Destination
QID/Rx Process
Destination Service Identifier
132 Control and Monitoring