Service Manual

tacacs-server key
Configure a key for communication between a TACACS+ server and a client.
Syntax
tacacs-server key [encryption-type] key
To delete a key, use the no tacacs-server key key command.
Parameters
encryption-type (OPTIONAL) Enter either zero (0) or 7 as the encryption type for the key entered.
The options are:
● 0 is the default and means the key is not encrypted and stored as clear text.
● 7 means that the key is encrypted and hidden.
key Enter a text string, up to 42 characters long, as the clear text password. Leading
spaces are ignored.
Defaults Not configured.
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Authentication key length increased to 42 characters.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.1 Introduced on the E-Series.
Usage
Information
The key configured with this command must match the key configured on the TACACS+ daemon.
tacacs-server vrf
Create an association between a TACACS server group and a VRF and source interface.
Syntax
tacacs-server vrf vrf-name [source-interface interface]
To delete the association between a TACACS server group and a VRF and source interface, use the no
tacacs-server vrf vrf-name [source-interface interface] command.
Parameters
vrf vrf-name Enter the keyword vrf and then the name of the VRF to associate a TACACS
server group with that VRF.
interface Enter the following keywords and slot/port or number information:
Security 1285