Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1161

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.2(1.0) Introduced on the Z9500.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Available on the C-Series and S-Series.

7.5.1.0 Added support for the DSCP Marking option.

7.4.1.0 Introduced on the E-Series.

Usage

Information

To access this command, enter the class-map command. After the class map is identified, you can

configure the match criteria.

Commands

class-map — identifies the class map.

match mac vlan

Configure a match criterion for a class map based on VLAN ID.

S4048–ON

Syntax

match mac vlan number

Parameters

number

Enter the VLAN ID. The range is from 1 to 4094.

Defaults none

Command Modes CLASS-MAP

Command

History

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.