Service Manual

Lines
Beginning
With or
Including
Description
● 1 - Hello packet
● 2 - database description
● 3 - link state request
● 4 - link state update
● 5 - link state acknowledgement
● 7 - external LSA
● 8 - link-state advertisement (OSPFv3)
● 9 - link local LSA (OSPFv2), Intra-Area-Prefix LSA (OSPFv3)
● 11 - grace LSA (OSPFv3)
Length: Displays the packet length.
Router ID: Displays the OSPF3 router ID.
Area ID: Displays the Area ID.
Chksum: Displays the OSPF3 checksum.
default-information originate
Configure the Dell Networking OS to generate a default external route into an OSPFv3 routing domain.
Syntax
default-information originate [always] [metric metric-value] [metric-type
type-value] [route-map map-name]
To return to the default values, use the no default-information originate command.
Parameters
always (OPTIONAL) Enter the keyword always to specify that default route information
must always be advertised.
metric metric-
value
(OPTIONAL) Enter the keyword metric then a number to configure a metric
value for the route. The range is from 1 to 16777214.
metric-type
type-value
(OPTIONAL) Enter the keywords metric-type then an OSPFv3 link state type
of 1 or 2 for default routes. The values are:
● 1 = Type 1 external route
● 2 = Type 2 external route
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of an established
route map.
Defaults Disabled.
Command Modes ROUTER OSPFv3
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.2(1.0) Introduced on the Z9500.
9.1.(0.0) Introduced on the S4810 and Z9000.
Open Shortest Path First (OSPFv2 and OSPFv3) 1063