Administrator Guide

Version Description
9.10(0.0) Introduced on the S6100–ON.
9.10(0.1P10) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S6000.
disable-mac-learn
Disable MAC address learning on the network port of a static VXLAN tunnel.
Syntax
disable-mac-learn remote-vtep-ip
To return to the default state of enabled, use the no disable-mac-learn command.
Parameters
remote-vtep-ip Enter the IP address of the remote VTEP that connects to the VXLAN tunnel on which
MAC learning should be disabled.
NOTE: The remote VTEP should already be configured.
Defaults Enabled
Command Modes VXLAN-INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command-Line Reference Guide.
Version Description
9.14(2.3) Introduced on the S4048–ON, S4048T-ON, S6000, S6010-ON, S6100-ON, and Z9100–
ON.
Usage Information
Use the disable-mac-learn command in the VXLAN-INSTANCE mode.
NOTE:
• This command is only applicable for static VXLAN and does not work for the other modes of
VXLAN (controller and nuage).
• The remote VTEP should already be configured.
• In case of static VXLAN VLT deployments, this configuration should be symmetric across VLT
nodes.
fail-mode
Configures failure-mode on the platform.
Syntax
fail-mode secure
To disable the fail-mode secure, use the no fail-mode securecommand.
Parameters
secure Enter the keyword secure to delete all its database and hardware flows/resources,
when the VTEP loses connectivity with the controller.
Defaults non secure
Command Modes VXLAN INSTANCE
Command History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell EMC
Networking OS Command Line Reference Guide.
1696 Virtual Extensible LAN (VXLAN)