Administrator Guide

Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld snooping explicit-tracking
Enable explicit MLD snooping tracking on an interface.
Syntax
ipv6 mld snooping explicit-tracking
To disable MLD snooping explicit tracking, use the no ipv6 mld snooping explicit-tracking
command.
Defaults Disabled.
Command Modes INTERFACE VLAN
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
ipv6 mld snooping mrouter
Configure a Layer 2 port as a multicast router port.
Syntax
ipv6 mld snooping mrouter interface {interface interface}
Parameters
interface Enter the keyword interfaceto indicate the next-hop interface to the multicast router.
interface Enter one of the following keywords and the interface information:
• For a null interface, enter the keyword null then the slot/port information. The Null
interface number is 0.
• For the Management interface on the stack-unit, enter the keyword
ManagementEthernet then the slot/port information.
• For a Loopback interface, enter the keyword loopback then a number from 0 to
16383.
• For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then
the slot/port
[/subport] information.
• For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/
port information.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
• For a port channel interface, enter the keywords port-channel then a number.
Defaults None.
Command Modes INTERFACE VLAN
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC
Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the S3048–ON, S4048–ON, S4048T-ON, S5048F-ON, S6000–ON,
S6010–ON, S6100–ON, Z9100–ON, S3100, and C9010.
1010 Multicast Listener Discovery Protocol