Service Manual

Related
Commands
● format flash – erases all the existing files and reformats the file system in the internal flash memory.
show os-version
Display the release and software image version information of the image file specified.
Syntax
show os-version [file-url]
Parameters
file-url (OPTIONAL) Enter the following location keywords and information:
● For a file on the internal flash, enter flash:// followed by the filename.
● For a file on an FTP server, enter ftp://user:password@hostip/
filepath.
● For a file on a TFTP server, enter tftp://hostip/filepath.
● For a file on the USB port, enter usbflash://filepath.
Defaults none
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Example
Usage
Information
NOTE: A filepath that contains a dot ( . ) is not supported.
show running-config
Display the current configuration and display changes from the default values.
Syntax
show running-config [entity] [configured] [status] [compressed]
Parameters
entity (OPTIONAL) To display that entity’s current (non-default) configuration, enter one
of the following keywords:
70 File Management