Service Manual

controller
Configures controller for the VXLAN instance on the platform.
Syntax
controller controller ID ip address port port-number tcp|ptcp|pssl|ssl
Parameters
controller ID Enter the controller ID.
ip address Enter the IP address of the controller.
port port-number (OPTIONAL) Enter the keyword port and the port number.
The range is from 1 to 6632. The default port number is 6632.
tcp (OPTIONAL) Enter the keyword tcp to configure tcp connection to controller.
ptcp (OPTIONAL) Enter the keyword ptcp to configure passive tcp connection to
controller.
pssl (OPTIONAL) Enter the keyword pssl to configure passive ssl connection to
controller.
ssl (OPTIONAL) Enter the keyword ssl to configure ssl connection to controller
(Default).
Defaults Disabled
Command Modes VXLAN INSTANCE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0) Introduced on the S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S6000.
Related
Commands
vxlan-instance — Enable VXLAN instance configuration on the platform.
show vxlan vxlan-instance
Displays information related to Network Virtualization Overlay (NVO) Gateway.
Syntax
show vxlan vxlan-instance instance ID
Parameters
instance ID Enter the VXLAN instance ID. The platform supports only the instance ID 1 in the
initial release.
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.10(0.0) Introduced on the S6100–ON.
Virtual Extensible LAN (VXLAN) 1509