Service Manual

Field Description
Incoming
interface
Displays the reverse path forwarding (RPF) interface towards the RP/ source.
RPF neighbor Displays the next hop from this interface towards the RP/source.
Outgoing
interface list:
Lists the interfaces that meet one of the following criteria:
● a directly connect member of the Group
● statically configured member of the Group
● received a (*,G) Join message
Example
Dell# show ip pim snooping tib
PIM Multicast Snooping Table
Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
SGR-P - (S,G,R) Prune
Timers: Uptime/Expires
* : Inherited port
(*, 225.1.2.1), uptime 00:00:01, expires 00:02:59, RP 165.87.70.1,
flags: J
Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
Outgoing interface list:
TenGigabitEthernet 2/11 RPF 165.87.32.2 00:00:01/00:02:59
TenGigabitEthernet 2/13 Upstream Port -/-
Dell# show ip pim snooping tib vlan 2 225.1.2.1 165.87.1.7
PIM Multicast Snooping Table
Flags: J/P - (*,G) Join/Prune, j/p - (S,G) Join/Prune
SGR-P - (S,G,R) Prune
Timers: Uptime/Expires
* : Inherited port
(165.87.1.7, 225.1.2.1), uptime 00:00:08, expires 00:02:52, flags: j
Incoming interface: Vlan 2, RPF neighbor 0.0.0.0
Outgoing interface list:
TenGigabitEthernet 2/11 Upstream Port -/-
TenGigabitEthernet 2/13 DR Port -/-
TenGigabitEthernet 2/20 RPF 165.87.32.10 00:00:08/00:02:52
show ip pim ssm-range
Display the non-default groups added using the SSM range feature.
4048–ON
Syntax
show ip pim [vrf vrf-name] ssm-range
Parameters
vrf vrf-name (OPTIONAL) Enter the keyword vrf followed by the name of the VRF to configure
this setting on that VRF.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
Networking OS Command Line Reference Guide.
Version Description
9.8(1.0) Introduced on the Z9100-ON.
PIM-Sparse Mode (PIM-SM) 1095