Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

1031

Table Of Contents

clear ipv6 ospf process

Reset an OSPFv3 router process without removing or re-configuring the process.

Syntax

clear ipv6 ospf [vrf vrf-name] process

Parameters

vrf

vrf-name

(Optional) Enter the keyword vrf followed by the name of the VRF to clear IPv6

routes corresponding to that VRF.

Command Modes

● EXEC

● EXEC Privilege

Command

History

This guide is platform-specific. For command information about other platforms, see the relevant Dell

Networking OS Command Line Reference Guide.

Version Description

9.8(1.0) Introduced on the Z9100-ON.

9.8(0.0P5) Introduced on the S4048-ON.

9.8(0.0P2) Introduced on the S3048-ON.

9.2(1.0) Introduced on the Z9500.

9.1.(0.0) Introduced on the S4810 and Z9000.

8.3.19.0 Introduced on the S4820T.

7.8.1.0 Added support for C-Series.

7.4.1.0 Introduced on the E-Series.

debug ipv6 ospf bfd

Display debug information and interface types for bidirectional forwarding detection (BFD) on OSPF IPv6 packets.

Syntax

[no] debug ipv6 ospf bfd [interface]

Parameters

interface

(OPTIONAL) Enter one of the following keywords and slot/port or number

information:

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port[/subport] information.

● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the

slot/port information.

● For a port channel interface, enter the keywords port-channel then a

number.

● For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

Command Modes EXEC Privilege