Service Manual

Parameters

enable Enter the keyword enable to enable the iSCSI optimization

feature.

Defaults Disabled.

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.

iscsi priority-bits

Configure the priority bitmap that advertises in the iSCSI application TLVs.

Syntax

iscsi priority-bits

To remove the configured priority bitmap, use the no iscsi priority-bits

command.

Defaults 4 (0x10 in the bitmap)

Command Modes PROTOCOL LLDP (only on the global, not on the interface)