Service Manual

iSCSI Optimization

Internet small computer system interface (iSCSI) optimization enables quality-of-service (QoS) treatment

for iSCSI storage traffic on an S4048–ON system.

To configure and verify the iSCSI optimization feature, use the following Dell Networking OS commands.

advertise dcbx-app-tlv

Configure DCBX to send iSCSI TLV advertisements.

Syntax

advertise dcbx-app-tlv iscsi

To disable DCBX iSCSI TLV advertisements, use the no advertise dcbx-app-

tlv iscsi command.

Defaults Disabled.

Command Modes PROTOCOL LLDP

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.

Usage Information You can configure iSCSI TLVs to send either globally or on a specified interface.

The interface configuration takes priority over global configuration.

iSCSI Optimization

995