Service Manual

show ipv6 fib stack-unit
View all FIB entries.
Syntax
show ipv6 fib [vrf vrf-name] stack-unit unit-number [summary |
ipv6-address]
Parameters
vrf vrf-name (Optional) Enter the keyword vrf followed by the name of
the VRF to display neighbors corresponding to that VRF.
slot-number Enter the number of the stack unit.
summary (OPTIONAL) Enter the keyword summary to view a summary
of entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display
networks that have more specific prefixes. The range is
from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Added support for VRF.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.4.2.1 Introduced on the S-Series.
Usage Information Host tables are not stored in CAM tables on S-Series platforms. Entries for
camIndex displays as zero (0) on the show ipv6 fib stack-unit output for
neighbor entries, such as address resolution protocol (ARP) entries.
984
IPv6 Basics