Service Manual

Example (S4810)

Dell#

Dell#show version

Dell Real Time Operating System Software

Dell Operating System Version: 1.0

Dell Application Software Version: Z9K-ICC-PRIM-SYNC-8-3-11-173

Build Time: Mon Jul 16 22:19:01 PDT 2012

Build Path: /local/local/build/build15/8.3.12.0/SW/SRC/Radius

Dell uptime is 1 minute(s)

System image file is "s4810-14"

System Type: S4810

Control Processor: Freescale QorIQ P2020 with 2147483648 bytes

of memory.

128M bytes of boot flash memory.

1 52-port GE/TE/FG (SE)

52 Ten GigabitEthernet/IEEE 802.3 interface(s)

Example (S6000)

Dell#S6000#show version

Dell Real Time Operating System Software

Dell Operating System Version: 2.0

Dell Application Software Version: 9-4(0-119)

Build Time: Tue Mar 18 10:32:02 PDT 2014

Build Path: /work.local/build/buildSpaces/build01/E9-4-0/SW/

SRCC

Dell Networking OS uptime is 1 day(s), 0 hour(s), 19 minute(s)

System image file is "DT-MAA-S6000-16-PI"

System Type: S6000

Control Processor: Intel Centerton with 3203911680 bytes of

memory, core(s) 2.

16G bytes of boot flash memory.

1 32-port TE/FG (SI)

32 Forty GigabitEthernet/IEEE 802.3 interface(s)

upgrade

Upgrade the bootflash image or system image of the management unit.

Syntax

upgrade boot {all | bootflash—image | bootselector-image} stack-unit {stack-unit-number | all}

{booted | flash: | ftp: | nfsmount | scp: | tftp: | usbflash:} file-url

Parameters

boot Enter the keyword boot to change the boot image.

system Enter the keyword system to change the system image.

ftp: After entering the keyword ftp:, you can either follow it with the location of the source file in this form: //

userid:password@hostip/filepath or press Enter to launch a prompt sequence.

scp: After entering the keyword scp:, you can either follow it with the location of the source file in this form: //

userid:password@hostip/filepath or press Enter to launch a prompt sequence.

slot0: After entering the keyword slot0:, you can either follow it with the location of the source file in this

form: //hostlocation/filepath or press Enter to launch a prompt sequence.

File Management