Service Manual

Line Description
Tx Power Low
Alarm Flag
This can be either true or false, depending on the Current Tx
power value displayed above.
Rx Power Low
Alarm Flag
This can be either true or false, depending on the Current Rx
power value displayed above.
Temperature High
Warning Flag
This can be either true or false, depending on the Current
Temperature value displayed above.
Voltage High
Warning Flag
This can be either true or false, depending on the Current
Voltage value displayed above.
Tx Bias High
Warning Flag
This can be either true or false, depending on the Tx bias
current value displayed above.
Tx Power High
Warning Flag
This can be either true or false, depending on the Current Tx
power value displayed above.
Rx Power High
Warning Flag
This can be either true or false, depending on the Current Tx
power value displayed above.
Temperature Low
Warning Flag
This can be either true or false, depending on the Current
Temperature value displayed above.
Voltage Low
Warning Flag
This can be either true or false, depending on the Current
Voltage value displayed above.
Tx Bias Low
Warning Flag
This can be either true or false, depending on the present Tx
bias current value displayed above.
Tx Power Low
Warning Flag
This can be either true or false, depending on the Current Tx
power value displayed above.
Rx Power Low
Warning Flag
This can be either true or false, depending on the Current Rx
power value displayed above.
Example
Dell#show interfaces TengigabitEthernet 1/1 transceiver
SFP is present.
SFP 0 Serial Base ID fields
SFP 0 Id = 0x03
SFP 0 Ext Id = 0x04
SFP 0 Connector = 0x07
SFP 0 Transciever Code = 0x00 0x00 0x00 0x01 0x20 0x40 0x0c
0x05
SFP 0 Encoding = 0x01
SFP 0 BR Nominal = 0x15
SFP 0 Length(9um) Km = 0x00
SFP 0 Length(9um) 100m = 0x00
SFP 0 Length(50um) 10m = 0x1e
SFP 0 Length(62.5um) 10m = 0x0f
SFP 0 Length(Copper) 10m = 0x00
SFP 0 Vendor Rev = A
SFP 0 Laser Wavelength = 850 nm
SFP 0 CheckCodeBase = 0x66
SFP 0 Serial Extended ID fields
SFP 0 Options = 0x00 0x12
SFP 0 BR max= 0
832
Interfaces