Service Manual

show os-version

Display the release and software image version information of the image file specified.

Syntax

show os-version [file-url]

Parameters

file-url (OPTIONAL) Enter the following location keywords and

information:

• For a file on the internal flash, enter flash:// followed

by the filename.

• For a file on an FTP server, enter ftp://

user:password@hostip/filepath.

• For a file on a TFTP server, enter tftp://hostip/

filepath.

• For a file on the USB port, enter usbflash://

filepath.

Defaults none

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original command.

Usage Information

NOTE: A filepath that contains a dot ( . ) is not supported.

File Management