Service Manual

Example (Multiple
Range)
This example shows how to use commas to add different interface types to the
range enabling all Tengigabit Ethernet interfaces in the range 5/1 to 5/23 and both
Tengigabit Ethernet interfaces 1/1 and 1/2.
Dell(config-if)# interface range tengigabitethernet 5/1 -
5/23, tengigabitethernet 1/1 - 1/2
Dell(config-if-range-te-1/1-1/2,te-5/1-5/23)# no shutdown
Dell(config-if-range-te-1/1-1/2,te-5/1-5/23)#
Example (Multiple
Range)
This example shows how to use commas to add VLAN and port-channel interfaces
to the range.
Dell(config-if)# interface range tengigabitethernet 5/1 -
1/23, tengigabitethernet 1/1 – 1/2,
Vlan 2–100, Port 1–25
Dell(config-if-range-te-1/1-1/2,te-5/1-5/23,vl-2-100,po-1-25)#
no shutdown
Dell(config-if-range)#
Related
Commands
interface port-channel — configures a port channel group.
interface vlan — configures a VLAN interface.
show config (from INTERFACE RANGE mode) — shows the bulk configuration
interfaces.
show range — shows the bulk configuration ranges.
interface range macro (define) — defines a macro for an interface-range.
interface range macro (define)
Defines a macro for an interface range and then saves the macro in the running configuration.
Syntax
define interface range macro name interface , interface , ...
Parameters
name Enter up to 16 characters for the macro name.
interface,
interface,...
Enter the keywords interface range and one of the
interfaces — slot/port[/subport], port-channel, or VLAN
number. Select the range of interfaces for bulk
configuration. You can enter up to six comma-separated
ranges. Spaces are not required between the commas.
Comma-separated ranges can include VLANs, port-
channels, and physical interfaces.
• For a port channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
Interfaces
795