Service Manual

on on

LocNegRx LocNegTx RemNegRx RemNegTx

off off off off

off on on off

off off off off

on off off on

on on on on

off off off off

on on on on

Commands

show running-config — displays the flow configuration parameters (non-default values only).

show interfaces — displays the negotiated flow control parameters.

interface

Configure a physical interface on the switch.

Syntax

interface interface range

Parameters

interface Enter one of the following keywords and slot/port[/subport]

or number information:

• For a null interface, enter the keyword null then the

slot/port information. The Null interface number is 0.

• For the Management interface on the stack-unit, enter

the keyword ManagementEthernet then the slot/port

information.

The slot range is from 1 to 11. The port

range is 1.

• For a Loopback interface, enter the keyword loopback

then a number from 0 to 16383.

• For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port[/subport]

information.

• For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

• For a Tunnel interface, enter the keyword tunnel then

the tunnel ID. The range is from 1 to 16383.

786

Interfaces