Service Manual

Version Description

8.3.19.0 Introduced on S4820T.

Usage Information Include the colon (:) when entering this command. This command checks the

specified flash memory for errors. If errors are found, the command recommends

that you format the flash.

CAUTION: If you elect to format the flash, all files – including the startup

configuration file – are lost. If you do decide to format the specified flash,

consider saving the running configuration as the startup configuration after

formatting the flash (use the write memory command or copy run start

command).

Commands

• copy — copy one file to another location.

• show file-systems — Display information about the file systems on the system.

mkdir

Creates a directory on the NFS mounted file system.

Syntax

mkdir nfsmount://mount-point/usrname

Command Modes CONFIGURATION

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S-Series.

Example

Dell#mkdir nfsmount:/nfs-mountpoint/guest

Commands

rmdir – removes a directory.

mount nfs

Mounts an NFS file system to a device.

Syntax

mount nfs rhost:path mount-point [username password]

File Management