Service Manual

• For a port channel interface, enter the keywords port-

channel then a number.

control-vlan vlan-

Enter the keyword control-vlan then the VLAN ID. The

range is from 1 to 4094.

Defaults none

Command Modes CONFIGURATION (conf-frrp)

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced on the C-Series.

7.4.1.0 Introduced.

Usage Information This command causes the Ring Manager to take ownership of the two ports after

IFM validates the configuration. Ownership is relinquished for a port only when the

interface does not play a part in any control VLAN, that is, the interface does not

belong to any ring.

Commands

show frrp — displays the Resilient Ring Protocol configuration information.

member-vlan

Specify the member VLAN identification numbers.

Syntax

member-vlan {vlan-range}

To return to the default, use the no member-vlan [vlan-range] command.

Force10 Resilient Ring Protocol (FRRP)

715