Service Manual

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Introduced on the C-Series.

7.5.1.0 Introduced.

Usage Information Executing this command without the optional ring-id command clears the

statistics counters on all the available rings. Dell Networking OS requires a

command line confirmation before the command executes. This command clears

the following counters:

• hello Rx and Tx counters

• Topology change Rx and Tx counters

• The number of state change counters

Example

Dell#clear frrp

Clear frrp statistics counter on all ring [confirm] yes

Dell#clear frrp 4

Clear frrp statistics counter for ring 4 [confirm] yes

Dell#

Commands

show frrp — displays the Resilient Ring Protocol configuration.

debug frrp

Clear the FRRP statistics counters.

Syntax

debug frrp {event | packet | detail} [ring-id] [count number]

To disable debugging, use the no debug frrp {event | packet | detail}

{ring-id} [countnumber] command.

Force10 Resilient Ring Protocol (FRRP)

711