Service Manual

Version Description

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series

Usage Information You must include the colon (:) when entering this command.

After reformatting is complete, three empty directories are automatically created

on flash: CRASH_LOG_DIR, TRACE_LOG_DIR and NVTRACE_LOG_DIR.

CAUTION: This command deletes all files, including the startup

configuration file. So, after executing this command, consider saving the

running config as the startup config (use the write memory command or

copy run start command).

Commands

copy – copies the current configuration to either the startup-configuration file or

the terminal.

show file-systems – displays information about the file systems on the system.

fsck flash

Checks the flash file system for errors.

Syntax

fsck flash:

fsck usbflash:

Defaults none

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

9.1(0.0) Introduced on S4810 and Z9000.

File Management