Service Manual

Version Description

7.5.1.0 Introduced on the C-Series.

E-Series Original command.

dir

Display the files in a file system. The default is the current directory.

Syntax

dir ([[flash://]path] nfsmount://<mount-point>/filepath)

Parameters

flash:

For a file or directory on the internal Flash, enter flash://

then the filename or directory name.

nfsmount: For a file or directory on an NFS-mounted file system, enter

nfsmount:// then the mount point and file path.

NOTE: While displaying a file directory on a remote NFS

file system, it is mandatory to specify the mount-point

that indicates the working directory on the NFS file

system. You cannot display details corresponding to the

root directory of the remote NFS file system.

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.7(0.0) Added support for NFS mount.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original command.

File Management