Service Manual

show link-bundle distribution
Display the link-bundle distribution for the interfaces in the bundle, type of bundle (LAG or ECMP), and
the most recently calculated interface utilization (either bytes per second rate or maximum rate) for each
interface.
Syntax
show link-bundle-distribution
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Example
Dell#show link-bundle-distribution
Link-bundle trigger threshold - 30
ECMP bundle - 64 Utilization[In Percent] - 0 Alarm
State - Inactive
Interface Line Protocol Utilization[In
Percent]
Te 1/1 Up 0
Po 128 Up 0
Po 100 Up 0
Dell#
Equal Cost Multi-Path (ECMP)
685