Service Manual

startup-config Enter the keywords startup-config to copy from the

startup configuration.

tftp: Enter the keyword tftp: to copy from the remote file

system, IPv4, or IPv6, (tftp://hostip/filepath).

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms,

see the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON. Added the

nfsmount:<mount-point> parameters that allow you to

mount a remote NFS file system.

9.4(0.0) Added the compressed-config parameter.

9.0.2.0 Introduced on the S6000.

8.4.1.0 Added IPv6 addressing support for FTP, TFTP, and SCP.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

8.2.1.0 Added usbflash and rpm0usbflash commands on E-

Series ExaScale.

7.6.1.0 Introduced on the S-Series and added the SSH port number

to the SCP prompt sequence on all systems.

7.5.1.0 Introduced on the C-Series.

E-Series Original command.

Usage Information Dell Networking OS supports a maximum of 100 files at the root directory level on

both the internal and external flash.

When copying a file to a remote location (for example, using Secure Copy [SCP]),

enter only the keywords and Dell Networking OS prompts you for the rest of the

information. For example, when using SCP, you can enter copy running-config

scp: where running-config is the source and the target is specified in the

ensuing prompts. Dell Networking OS prompts you to enter any required

information for the named destination — remote destination, destination filename,

user ID, password, and so forth.

When you use the copy running-config startup-config command to copy

the running configuration (the startup configuration file amended by any

configuration changes made since the system was started) to the startup

File Management