Service Manual

Version Description
9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z-Series.
ip dhcp snooping binding
Create a static entry in the DHCP binding table.
Syntax
[no] ip dhcp snooping binding mac address vlan-id vlan-id ip
ip-address interface type slot/port[/subport] lease number
Parameters
mac address Enter the keyword mac then the MAC address of the host to
which the server is leasing the IP address.
vlan-id vlan-id Enter the keywords vlan-id then the VLAN to which the
host belongs. The range is from 2 to 4094.
ip ip-address Enter the keyword ip then the IP address that the server is
leasing.
interface type Enter the keyword interface then the type of interface to
which the host is connected:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
slot/port[/subport] Enter the slot and port number of the interface. Enter the
subport number if a 40G port is fanned-out into 10G ports.
lease time Enter the keyword lease then the amount of time the IP
address are leased. The range is from 1 to 4294967295.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
656
Dynamic Host Configuration Protocol (DHCP)