Service Manual

Change to a different working directory.

Syntax

cd flash: <directory name and path>

Parameters

flash: Use the keyword flash: to enter the directory name and

path.

directory name

and path

Enter the directory name and path as follows: directory

name ([[flash://]directory_path])

Command Modes EXEC Privilege

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Added NFS mount support. Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

E-Series Original command.

HTTP Copy via CLI

Copy one file to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP,

and SCP (in the hostip field).

Syntax

copy http://10.16.206.77/sample_file flash://sample_filecopy

flash://sample_file http://10.16.206.77/sample_file

You can copy from the server to the switch and vice-versa.

Parameters

copy http:

flash:

Address or name of remote host []: 10.16.206.77

Port number of the server [80]:

File Management