Service Manual

EXEC Privilege
Command History
Version Description
9.8(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–
ON, Z9000, Z9500, S3048–ON, and S4048–ON.
Example displaying
total-buffer
information for the
interface
Dell# show hardware buffer interface tengigabitethernet 1/1 buffer-info
----- Buffer Stats for Interface Te 1/1 -----
Maximum Shared Limit for the Interface: 38336
Default Packet Buffer allocate for the Interface: 120
Used Packet Buffer for the Interface: 0
Example displaying
priority-group
range
Dell#show hardware buffer interface tengigabitethernet 1/1 priority-
group 0 buffer-info
----- Buffer stats for unit: 0 port: 1 (interface Te 1/1) -----
------------------------------------------------------------------------
PG# PRIORITIES ALLOTED (CELLS) COUNTER (CELLS)
MIN SHARED MODE HDRM MIN SHARED HDRM
------------------------------------------------------------------------
0 - 61440 0 STATIC 174 0 0 0
Dell#
Example displaying
queue range
show hardware buffer-stats-snapshot
Displays buffer statistics tracking resource information for a specific interface.
Syntax
show hardware buffer-stats-snapshot resource interface
interface{priority-group { id | all } | queue { ucast{id | all}
{ mcast {id | all} | all}
Parameters
buffer-stats-
snapshot unit
number
Display the historical snapshot of buffer statistical values
unit Enter the keyword unit along with a port-pipe
number. The range is from 0 to 0.
interface interface
Enter any of the following keywords and slot/port[/subport]
or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port[/subport]
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
queue Enter the keyword queue after id for specific queue or
keyword all.
Debugging and Diagnostics
633