Service Manual

To display total buffer information for the port, enter the
keywords buffer-info. To display a queue range, enter 0
to 14 for a specfic queue or all.
cpu data-plane
statistics
(Optional) Enter the keywords cpu data-plane
statistics then the keywords stack port and its
number,
from 1 to 72 to display the data plane statistics,
which shows the High Gig (Higig) port raw input/output
counter statistics to which the stacking module is
connected.
cpu management
statistics
Enter the keywords cpu management statistics to
display the counters of the management port.
cpu party-bus
statistics
Enter the keywords cpu party-bus statistics, to
display the Management plane input/output counter
statistics of the pseudo party bus interface.
drops [unit unit-
number]
Enter the keyword drops to display internal drops on the
selected stack member. Enter the drops keyword to display
internal drops on the selected stack member.
fpga register Enter the keyword to display the register value of fpga
resgister details in S4810, Z9000 and S6000.
unit unit-number
{counters | details
| port-stats [detail]
| register}
Enter the keyword unit then 0 to 3 and then enter one of
the following keywords to troubleshoot errors on the
selected port-pipe and to give status on why a port is not
coming up to register level: counters, details, port-
stats [detail]
, or register.
TI monitor Enter the unit keyword to show information regarding the TI
register.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Replaced the keyword port with interface. Introduced
on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
Debugging and Diagnostics
615