Service Manual

stack-unit
number
Enter the keywords stack-unit then a number to select a
stack ID. The range is from 1 to 6.
port-set 0–0 Enter the keyword port-set with a port-pipe number. The
range is from 0 to 0.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
show hardware stack-unit
Display the data plane or management plane input and output statistics of the designated component of
the designated stack member.
Syntax
stack-unit <id> {buffer [ unit 0 ] total buffer | buffer unit 0
interface all queue [(0-14) | a11] buffer-info}{cpu data-plane
statistics | cpu management statistics | drops [unit number] |
fpga register | party-bus statistics | stack-port | ti-monitor
| unit 0-1 {counters | details | port-stats [detail] |
register}}
Parameters
stack-unit stack-
unit {command-
option}
Enter the keywords stack-unit to select a particular stack
member and then enter one of the following command
options to display a collection of data based on the option
entered. The range is from 1 to 6.
buffer Enter the keyword buffer. To display the total buffer
statistics for the stack unit, enter the keyword total-
buffer
. To display buffer statistics for a all interface, enter
the keyword interface followed by the keyword all.
614
Debugging and Diagnostics