Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4048-ON

571

572

573

574

575

576

577

578

579

580

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.16.0 Introduced on MXL 10/40GbE Switch IO Module.

Usage Information You can configure iSCSI TLVs to send either globally or on a specified interface.

The interface configuration takes priority over global configuration.

advertise dcbx-appln-tlv

On a DCBX port with a manual role, configure the application priority TLVs advertised on the interface to

DCBX peers.

Syntax

advertise dcbx-appln-tlv {fcoe | iscsi}

To remove the application priority TLVs, use the no advertise dcbx-appln-

tlv {fcoe | iscsi} command.

Parameters

{fcoe | iscsi} Enter the application priority TLVs, where:

• fcoe: enables the advertisement of FCoE in application

priority TLVs.

• iscsi: enables the advertisement of iSCSI in application

priority TLVs.

Defaults Application priority TLVs are enabled to advertise FCoE and iSCSI.

Command Modes PROTOCOL LLDP