Service Manual

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.

dcb-enable

Enable data center bridging.

Syntax

dcb enable[pfc-queues 1|4]

To disable DCB, use the no dcb enable command.

Parameters

pfc-queues Enter the pfc-queue range. To disable DCB, use the no dcb

enable command. The range is from 1 or 2.

Defaults None

Command Modes CONFIGURATION