Service Manual

half-life period expires. The range is from 1 to 45. The
default is 15 minutes.
reuse (OPTIONAL) Enter a number as the reuse value, which is
compared to the flapping route’s Penalty value. If the
Penalty value is less than the reuse value, the flapping route
is once again advertised (or no longer suppressed). The
range is from 1 to 20000. The default is 750.
suppress (OPTIONAL) Enter a number as the suppress value, which is
compared to the flapping route’s Penalty value. If the
Penalty value is greater than the suppress value, the flapping
route is no longer advertised (that is, it is suppressed). The
range is from 1 to 20000. The default is 2000.
max-suppress-
time
(OPTIONAL) Enter the maximum number of minutes a route
can be suppressed. The default is four times the half-life
value. The range is from 1 to 255. The default is 60 minutes.
route-map map-
name
(OPTIONAL) Enter the keyword route-map then the name
of a configured route map.
Only match commands in the configured route map are
supported.
Defaults Disabled.
Command Modes
• ROUTER BGP
• ROUTER BGP-address-family
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
416
Border Gateway Protocol