Service Manual

Related
Commands
neighbor bfd disable — Explicitly disables a BFD session with a BGP neighbor or a
BGP peer group.
neighbor bfd disable
Explicitly disable a BFD session with a BGP neighbor or a BGP peer group.
Syntax
neighbor {ip-address | peer-group-name} bfd disable
Parameters
ip-address Enter the IP address of the BGP neighbor that you want to
explicitly disable for BFD sessions in dotted decimal format
(A.B.C.D).
peer-group-name Enter the name of the peer group that you want to explicitly
disable for BFD sessions.
Defaults none
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
9.0.0.0 Introduced on the Z9000.
8.3.19.0 Introduced on the S4820T.
8.3.8.0 Introduced on the S4810.
8.4.1.3 Introduced on the E-Series ExaScale.
Usage Information
When you explicitly disable a BGP neighbor for a BFD session with the neighbor
bfd disable command:
• The neighbor does not inherit the global BFD disable values configured with the
bfd neighbor command or configured for the peer group to which the
neighbor belongs.
396
Bidirectional Forwarding Detection (BFD)