Service Manual

Command History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.0.0.0 Introduced on the Z9000.

8.3.19.0 Introduced on the S4820T.

8.3.10.0 Introduced on the S4810.

8.2.1.0 Introduced on the E-Series ExaScale.

7.6.1.0 Introduced on the C-Series.

7.4.1.0 Introduced on the E-Series.

Example

Dell(conf-if-te-1/3)#bfd interval 250 min_rx 300 multiplier 4

role passive

Dell(conf-if-te-1/3)#

bfd neighbor

Establish a BFD session with a neighbor.

Syntax

bfd neighbor ip-address

To remove the BFD session with the neighbor, use the no bfd neighbor ip-

address command.

Parameters

ip-address Enter the IP address of the neighbor in dotted decimal

format (A.B.C.D).

Defaults none

Command Modes INTERFACE