Service Manual

All routes with the NO_EXPORT (0xFFFFFF01) community
attribute must not be advertised outside a BGP
confederation boundary.
none Enter the keyword none to remove the community attribute
from routes meeting the route map criteria.
additive (OPTIONAL) Enter the keyword additive to add the
communities to already existing communities.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Related
Commands
match community — redistributes routes that match the COMMUNITY attribute.
set level
To specify the IS-IS level or OSPF area to which matched routes are redistributed, configure a filter.
Syntax
set level {backbone | level-1 | level-1-2 | level-2 | stub-
area}
To remove a set level condition, use the no set level {backbone | level-1
| level-1-2 | level-2 | stub-area} command.
Parameters
backbone Enter the keyword backbone to redistribute matched routes
to the OSPF backbone area (area 0.0.0.0).
Access Control Lists (ACL)
303