Service Manual

seq — configures a MAC address filter with a specified sequence number.
mac access-list extended
Name a new or existing extended MAC access control list (extended MAC ACL).
Syntax
mac access-list extended access-list-name [cpu-qos
To delete a MAC access list, use the no mac access-list extended access-
list-name command.
Parameters
access-list-name Enter a text string as the MAC access list name, up to 140
characters.
cpu-qos Enter the keywords cpu-qos to assign this ACL to control
plane traffic only (CoPP).
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.10.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names were up to 16 characters long.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
Usage Information
The number of entries allowed per ACL is hardware-dependent. For detailed
specifications about entries allowed per ACL, refer to your line card
documentation.
Access Control Lists (ACL)
275