Service Manual

The MAC ACL can be applied on Physical, Port-channel and VLAN interfaces. As per the specified rules in
the ACL, the traffic on the interface/ VLAN members or Port-channel members will be permitted or
denied.
clear counters mac access-group
Clear counters for all or a specific MAC ACL.
Syntax
clear counters mac access-group [mac-list-name]
Parameters
mac-list-name (OPTIONAL) Enter the name of a configured MAC access
list.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.1.1.0 Introduced on the E-Series.
mac access-group
Apply a MAC ACL to traffic entering or exiting an interface. The following interface types can be used for
VLAN , Physical interface, Port channel interface. Enter into the interface mode and apply the mac acl in
the following manner.
Syntax Applying MAC Access group on a physical / port channel interfacemac access-
group access-list-name {in [vlan vlan-range] | out}
To delete a MAC access-group, use the no mac access-group mac-list-
name
command.
262
Access Control Lists (ACL)