Service Manual

show ethernet cfm maintenance-points remote
Display the MEP Database.
Syntax
show ethernet cfm maintenance-points remote detail [active |
domain {level | name} | expired | waiting]
Parameters
active Enter the keyword active to display only the MEPs in
active state.
domain [name |
level]
Enter the keyword domain then the domain name or
domain level.
expired Enter the keyword expired to view MEP entries that have
expired due to connectivity failure.
waiting Enter the keyword waiting to display MEP entries waiting
for response.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the S-Series.
Example
Dell#show ethernet cfm maintenance-points remote detail
MAC Address: 00:01:e8:58:68:78
Domain Name: cfm0
MA Name: test0
Level: 7
VLAN: 10
MP ID: 900
Sender Chassis ID: Force10
MEP Interface status: Up
MEP Port status: Forwarding
Receive RDI: FALSE
MP Status: Active
802.1ag
191