Service Manual

Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW STATIC
Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information You can configure the MAC address, of a VLT peer in remote VLT Domain, to be
associated with the static VLT proxy gateway and exclude a VLAN or a range of
VLANs from proxy routing..
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)#remote-mac-address
00:01:e8:06:95:ac exclude-vlan 3
peer-domain-link port-channel exclude-vlan
Configure the VLT port channel, which is connected to remote VLT domain for Proxy Gateway and
configure the VLANs that needs to be excluded from VLT Proxy Gateway.
S4048–ON
Syntax
[no] peer-domain-link port-channel interface-identifier
exclude-vlan vlan-range
Parameters
port-channel Configure the proxy-gateway interface port-channel. Port
channel range is from 1 to 128.
vlan-range
Enter the VLAN IDs in which proxy gateway is not needed.
The VLANs are excluded from doing proxy gateway. The
value can be a single VLAN ID or comma-separated, VLAN
IDs or a range of VLAN IDs or a combination. For example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Command Modes VLT DOMAIN PROXY GW LLDP
1824
VLT Proxy Gateway